Amosite There are different forms of
asbestos. A certain form that is prone to causing
mesothelioma is
amosite. Asbestos can be classified into two specific groups, serpentine and amphibole. The amphibole group contains five different forms of
asbestos, and
amosite is one of them. Asbestos in the amphibole group can be placed into this category because of their chain like structures of fibers. Amosite can be bent into arch-like structures because of its flexibility. This, in turn, causes the fibers to break into smaller bundles and creates sharp, needle-thin fibers. This type of asbestos IS found as long, thin threads or flat prisms that are usually found in bundles. These fibers are so dangerous because OF how quickly they can become small, sharp fibers. Amosite fibers can be located in any building that used or manufactured asbestos related materials. This type of fiber was used less frequently than other forms of asbestos, but used commercially because of its strength and indestructible quality. Amosite is a type of material that was found and distributed mainly from South Africa. Amosite can be spotted in buildings and industrial plants. This form of asbestos was fairly uncommon and its use was limited in manufacturing companies around the United States. It is a stable form of asbestos as long as it is not tampered with. Its only toxicity is if its airborne fibers are inhaled. This can eventually lead to lung-related illness such as
asbestosis and mesothelioma. If amosite is disturbed it should be properly sealed off in its location and removed properly (by at least contacting an asbestos removal professional for advice) and disposed of in the proper landfill. In order for the toxic material to be harmless, it needs to be buried in a specific landfill designed for asbestos removal. After amosite is deposited and it begins to decompose, little is known about its hazardous effects.
